Hade problem med en batch på 10st 4MB INL-kort. De ville inte starta med speciellt många spel. vissa spel startade på mina tredjepartskonsoler, men inte på original PAL SNES.
Har du fått svar från Pual på InfiniteNESlives:
Paul från INL skrev:
Hi Mattias,
So I'm not 100% sure on what's going on here yet. We are currently in the process of migrating from Xilinx CPLDs to Lattice CPLDs (the square chip on the right side of the board). The bigger, older, and now discontinued (labeled "Xilinx") chips were confirmed to work with all those games, but the new smaller (labeled "Lattice") chips were confirmed to have issues with some of your roms. I actually don't see the issue with all the roms though, just some of them. Here's a breakdown of what I found.
Hyper Metroid(4MB LoRom)
Old Xilinx boards: boots, but gives copywright warning due to SRAM being too large. Do you have a copy of the rom that patched out that copy protection I can test with?
New Lattice boards: does not boot
Super Mario Land Tatanga's Return(4MB LoRom)
Old Xilinx boards: works fine
New Lattice boards: does not boot
Ganpuru Gunman's Proof(3MB LoRom)
Old Xilinx boards: works fine
New Lattice boards: does not boot
Donkey Kong Country Boss Blitz(4MB HiRom)
Old Xilinx boards: works fine
New Lattice boards: works fine, I didn't have any issues with this rom so I wasn't able to replicate your issue. I also don't have any issues with the original DKC like you had. I'm not sure why this is. Are you forgetting to place the switch in Hi position perhaps?
Magical Pop'n (3MB LoROM)
You attached this rom, but didn't mention if you had issues with it or not.
It works on both old Xilinx and new Lattice boards just fine for me.
Based on magical pop'n this being a >2MB LoROM game that works, I question if it is indeed an issue with all >2MB LoROM games. But that does seem to be a general pattern. Perhaps Pop'n doesn't need the 3rd MB till further into the game..? I need to check into the issue with the new Lattice boards some more. I just got your returned boards yesterday so I can test your boards with these roms for myself and also test them in my PAL SNES to see if it's possibly related to PAL/NTSC as well. I'll report back when I have time to look into this more later this week.
Jag hoppas att de hittar en lösning så de nya chipen fungerar med alla spel. de tidigare har ju alltid fungerat klockrent.
_________________
Min
projekttråd. Här har du pågående och avslutade projekt med inriktning på customboxar, dekaler mm.
mrTentacle skrev:
det börjar spåra ur lite, ALLT är Aynez fel
snotcrow skrev:
Och jäklar vad den står, rätt upp utan hjälp.
lurx skrev:
Sen så är den ju liten också
!
Bli medlem
Logga in
FAQ
Sök
